Stainless steel 4-layer laying hen cage
The highly efficient and intensive cage designed specifically for laying hen farming is made of high-quality stainless steel and has a 4-layer three-
dimensional structure, which can greatly improve space utilization. It is suitable for medium to large laying hen farms, ensuring the health of the flock
while improving egg-laying efficiency.
**Multi-layer synchronous operation**:
Each layer has an independent conveyor belt or roller to collect
eggs from 4 layers simultaneously to avoid missing any.
Cascading layout**:
4-layer structure, each layer has independent space, uniform ventilation and lighting, avoiding chicken manure pollution in the lower layer.
**Tilt angle**:
The cage bottom tilts forward 7°, and the eggs automatically roll down to the egg collection trough for easy collection.
Quality inspection and optimization
Load-bearing test
Simulate the maximum load (such as placing a 50kg weight on a single layer for 24 hours) and observe deformation or breakage.
Anti-corrosion verification
Pass the salt spray test (≥48 hours without red rust) to ensure a service life of ≥15 years.
Functional test
Simulate the activity of chickens to check the efficiency of the manure cleaning system (feces falling time ≤10 seconds) and the smoothness of drinking water and feeding.
Cage net:
The bottom of the net is made of imported aluminum-magnesium-zinc-plated wire. The advantages of this wire are high strength, good elasticity and smooth surface. It can effectively relieve chicken fatigue and reduce eggshell damage.
Plate:
275g galvanized plate, corrosion-resistant, customized high-strength model, durable.
| model |
Number of layers |
Cage width(mm) |
Cage depth(mm) |
Square centimeters Single cage feeding capacity
|
Square centimeters Single cage Rearing area |
Overall width (mm) |
Layer height (mm) |
Overall height (mm) |
9LDC3216
|
3 |
600/625 |
600/650 |
9/10 |
450/433 |
1200/1300 |
590/690 |
2150/2350 |
9LDC4288
|
4 |
600/625 |
600/650 |
9/10 |
450/433 |
1200/1300 |
590/690 |
2740/3040 |
9LDC5360
|
5 |
600/625 |
600/650 |
9/10 |
450/433 |
1200/1300 |
590/690 |
3330/3780 |
1. **Drive motor**
- Usually a **reduction motor** (power 0.75-1.5kW) is used, which has the characteristics of low speed and high torque and is suitable for frequent start and stop.
- Some systems use **three-phase asynchronous motor**
2. **Transmission device**
- **Chain/sprocket transmission**: Commonly used in scraper-type manure cleaners, corrosion-resistant and strong load-bearing capacity.
- **Wire rope winch**: Used for traction-type manure belts, which need to be checked regularly.
- **Gear rack**: High precision, easy maintenance of the oil filling port.
3. **Manure belt/scraper**
- **Manure belt**: PP material, laid on the bottom of the cage, driven by the motor to transport manure to the manure collection ditch.
- **Manure scraper**: Made of stainless steel or engineering plastics, it scrapes manure horizontally to the outside of the house.
4. **Control system**
- **Timing controller**: Preset the number of manure cleaning times per day (usually 2-4 times), which can be linked to the environmental monitoring system (such as ammonia sensor). - **Overload protection**: The motor will automatically shut down when it is overheated or stuck to avoid equipment damage.
Audited Supplier 
){kind=link}