Fully Automatic H type 4 Tiers Layer Cage System
Products Introduction
EGG CHICKEN CAGERAISING EOUIPMENT Laying hen cage equipment
Features
The cage mesh uses galvanized wire, which is more corrosion-resistant than hot-dip galvanized wire.
The material trough is made of 1.0mm thick zinc-aluminum-magnesium plate, which has stronger corrosion resistance; the expansion joint is seamless, no material is stored, and the wheels run smoothly.
The push-pull cage door has a drum limit and is easy to operate, making it easy to transfer chickens in and out.
Four tensioned steel wires on each side support the bottom net to reduce the depression of the bottom net, which can greatly reduce broken eggs, dirty eggs and cracked eggs.
There is an egg protection baffle on the inside of the trough to prevent chickens from pecking eggs, and at the same time, to prevent chicken manure from splashing into the lower trough.
The tailstock is equipped with two manure scrapers to effectively clean the manure belt; the integrated linkage handle makes it easy to open the cleaning scraper.
The head frame uses a screw + chain to adjust the tension of the manure belt, which is more accurate and efficient.
1. Products Size
Layer cage equipment parameters
| Standard section size (length × width) |
1250×1300mm |
1200×1200mm |
| Single cage size (length × depth) |
625×650mm |
600×600mm |
| Single cage bottom net area |
4062.5cm² |
3600cm² |
| Area used by a single chicken |
451/406cm² |
450/400cm² |
| Single cage breeding quantity |
9/10Pcs |
8/9Pcs |
| Number of layers |
5 |
8 |
12 |
| Cage height H1 (excluding feeder truck) |
3550 |
6330 |
9670 |
| Overall height of equipment H2 (mm) |
3890 |
6670 |
10010 |
| Floor height H3 (mm) |
640 |
640 |
640 |
| Single group breeding quantity (2.5 meters) |
360/400Pcs |
576/640Pcs |
864/960Pcs |
| Cage type |
1250mm×1300mm |
1200mm×1200mm |
| Single cage size |
625mm×650mm |
600mm×600mm |
| Single cage breeding quantity |
9 pieces (451cm²) |
8 pieces (450cm²) |
| 5-layer single group breeding quantity |
360 pieces |
320 pieces |
| Number of groups of chicken houses with a length of 100 meters |
36 groups (72 sections) |
37.5 group (75 knots) |
| Number of breeding units in a single building with 5 floors and 5 rows |
64,800 pieces |
60,000 pieces |
| Comparison of breeding volume in a single building |
4800 more |
|
| cost comparison |
The cost of a single chicken house is reduced by 5.5% |
|
Economic comparison
| Number of layers |
4th floor |
5th floor |
| Single cage breeding quantity |
9 pieces (451cm²) |
9 pieces (451cm²) |
| Single group breeding quantity |
288 only |
360 pieces |
| Number of cage sets for 100 meters |
36 groups (72 sections) |
36 groups (72 sections) |
| Breeding capacity of a single building with 4 floors and 5 rows |
51840 pieces |
64,800 pieces |
| Comparison of breeding volume in a single building |
|
12960 more |
| cost comparison |
|
The cost of a single chicken house is reduced by 3% |
1. The horizontal spacer mesh structure is K-type mesh.
2. The cage door is configured as a left and right sliding door.
3. Drinking water line and nipple configuration: There is a water line in the middle and 2 nipples per cage.
4. Configure the top network on each layer.
5. The guide rail of the feeder truck is a hot-dip galvanized rectangular tube.
6. The bottom net angle is 7°.
7. Configure the top network on each layer.
8. The driving roller is a smooth roller without glue coating process.
9. The egg collecting machine is a belt type, and the color of the egg belt and egg claws is updated to red.
10. The transmission shaft of the egg collecting machine is changed to 45# round steel with color-plated surface.
11. Add a spiral egg belt brush device.
12. The white egg belt and the red ring belt share a driving motor.
13. The egg belt adjustment is external, which is convenient for operation.
2.products advanage
1).Such cages have larger bearing capacity and the more breeding space, C shape leg is formed of hot dip galvanized sheet is easy to clean.
2).cage bottom mesh adopt Belgium Bekaert galvanized aluminum wire, the advantages of this wire is high intensity, good elasticity ,it can effectively alleviate the chicken fatigue. Compared to hot-dip ,it's not only greatly enhance the arntirust effect, but also improve the cage surface smooth, to avoid the hurt of chicken scratch.
3).
4)The cage bottom adopt Belgium Bekaert galvanized aluminum wire,, which advantage is high intensity, good elasticity , the surface is so smooth to reduce the egg breakage
5). cage bottom angle is 7°,the reasonable rolling angle is designed to reduce the rate of egg breakage.
6).
7)
8\
9\new factory
Factory Introduction
Our factory was founded in 2002 and has more than 800 employees,covers more than 100,000 square meters,is a professional manufacturer of poultry farming equipments including "H"frame layer cage system,broiler cage system,duck-production cage system, ,egg-duck cage system ,layer rearing cage system,layer breeder parents cage system,feed silo,bulk feed transporting tank and feed machinery etc.
Our Service
1.Our professional team can design and produce the most suitable equipment for our customers.
2. For after-sale service, we have professional installation team which can provides installation service to our customers all over the world. And anytime you will find us on WhatsApp for 24 hours on line.
3.We can supply and share Chinese chicken raising experience to our customers. also supply equipment techinal training and farming guiding to our customers.
Please feel free to contact us to ask design and price.
){kind=link}